Unitree A2

Unitree's 2025 industrial quadruped, with a lidar unit at both its front and back.

Unitree A2 is the industrial-grade quadruped robot Unitree Robotics released in August 2025, positioned between the consumer Go2 and the heavier-duty B2. Published specs: about 37 kg unloaded, a maximum standing payload of 100 kg and a 25 kg walking payload, roughly 20 km of range unloaded, and a top speed of about 5 m/s; it carries an industrial lidar, a sensor that measures distance and builds a 3D map, plus a high-definition camera at both the front and back to eliminate blind spots, and its dual batteries can be hot-swapped. It targets inspection, logistics, emergency response, and research. Note that it is unrelated to AgiBot's humanoid robot also called “Expedition A2”; the two simply share a name.

ExampleA power utility has the A2 carry inspection equipment and patrol a substation autonomously along a set route, swapping its battery to keep going when it runs low.

Related

Unitree Robotics · Quadruped Robot · Unitree B2 · Unitree Go2 · Inspection Robot · LiDAR

Sources

Unitree launches A2 quadruped equipped with front and rear lidar (The Robot Report)
Unitree launches A2 quadruped robot with 100 kg load capacity and 20 km range

As of

2025-08